Fire Centurion Wireless Smoke Alarm System for the Deaf

Wireless Smoke Alarm System for the Deaf

The Fire Centurion Wireless Smoke Alarm for the Deaf and hard of Hearing has a wireless ionisation smoke detector with audio alarm, which sends a radio frequency signal to a base unit placed next to the bed. The base unit contains a flashing strobe light and a vibrating pad, which can be placed under the pillow.

The Fire Centurion was designed in 1989 and was the first wireless smoke detection system for deaf people. Traditionally, smoke alarms for the deaf consist of a smoke detector that is linked to an alarm box with wire. The Fire Centurion uses Hi-Tech wireless signaling to enable the smoke detector to wirelessly operate the alarm receiver in the bedroom. A powerful vibrating disk is positioned in the bed under the pillow. Additionally, a bright xenon flashing strobe light operates when signaled by the smoke detector. The effect of the vibration and flashing light disturb the user from sleep.

Transmitter specification: (Ionisation detectors) Battery powered 9 VOLT Lithium 10 year battery. Transmitter frequency 433.92 MHz. Range 100m, low battery and fault signal warning transmitted to alarm receiver. Dip switch transmitter encoding allows user to configure multiple detectors with single alarm receivers, or to add additional receivers as required.

Centurion alarm receiver specification: Dimensions: 130mm x 100mm x 50mm. Two channel radio receiver - trigger and supervisory information. Power failure indication LED, 16 hour battery backup, system failure LED with timed vibration warning, 12 volt DC powered via AC/DC power adapter. Dip switch encoding. Xenon strobe light. CE type approval. Conforms to BS 5446 III 2005. Vibrating pad with thermal cutout. Zero maintenance required. No professional installation required. Over 8000 units supplied in the UK alone.

Vibrating radio pager for use with fire centurion smoke detectors
It is recommended in BS5839 that deaf people be issued with a vibrating pager for domestic installations. The ELVP-4 vibrating pager provides an economical solution to fulfilling this requirement. The pager is rechargeable, has a re-charge warning LED and an output for a plug in vibrating pillow pad.
Note: This pager is not supplied as standard

Fire Centurion Vibration Radio Pager for use with Wireless Smoke Alarm System for the Deaf This pager vibrates if the Centurion Deaf Alarm detects fire No professional installation 100 metre transmission range on all products Transmission frequency 433.92 MHz No periodic servicing or maintenance required All low voltage or battery operated It is recommended in BS5839 that deaf people are issued with a vibrating pager for domestic installations. The ELVP-4 vibrating pager provides an economical solution to fulfil this requirement. The pager is rechargeable, has a re-charge warning LED and an output for a plug-in vibrating pillow pad.

Pager Specification: Four channel vibration only pager offers numerous solutions for person to person paging, security and patient care requirements. Robust, lightweight and simple to use. The pager measures H 95mm W 55mm D 18mm and weighs only 83g including the battery. When triggered by a compatible transmitter, the pager vibrates for 30 seconds. A transmitter identification LED flashes. A reset switch provides an alarm cancel. One press of the reset switch cancels the vibration a second press of the reset switch cancels the flashing channel LED. Supplied with charger. The pager operates from a rechargeable 9 VOLT PP3 type battery with a single charge providing 72 hours use. General Specification: Frequency 433.92 Mhz. Coding by dip switch. Operating range 100M.

Fire Centurion Additional Detector for use with Wireless Smoke Alarm System for the Deaf This is an additional smoke detector for the fire centurion wireless smoke detector system for the deaf No Professional Installation Required 100 Metre Transmission Range No Periodic Servicing Or Maintenance Required Low Voltage Or Battery Operated